Download BlueTerm 2 apk 2.0 free for Android smartphone

24 Jul
BlueTerm 2

Posted by fusionimage in Tools | July 24, 2015 | 4 Comments

Apk file size: 64.0 KB

Bluetooth terminal emulator for communicating with any serial device using a bluetooth serial adapter. The RFCOMM/SPP protocol emulates serial communications over bluetooth.
You need a bluetooth serial adapter like the HC-05 or HC-06

You can use this to control your Arduino or Raspberry Pi, if you have connected a bluetooth serial adapter to its serial port.

This is an updated version to
In the original version it was impossible to use commands like 'ctrl-c' on newer devices with just a few buttons.
Both volume keys are set to be the special key for those commands now. Simply press one of them together with e.g. 'c' on your android keyboard and the output will be 'ctrl-c'.

This is an opensource application. You can get more info and the source code from:
Thanks everybody for the feedback.

Whats new


fusionimage part of our Tools and have average installs from 10000 to 50000. Last Update July 24, 2015. Google play rating is 81.9231. Current verison is 2.0. Actual size 64.0 KB.

Download blueterm-2.apk 64.0 KB


Jon McPhalen

Useful for communicating with serial bluetooth module connected to a microcontroller. Problems: Pressing backspace key on Android keyboard does not seem to work correctly, and it would be really nice to have separate colors for outgoing and incoming text.

Bart Dinger

one small bug Not sure it's this apps fault, but it doesn't work with SwiftKey, I had to change keyboard to default or I can't type. Happens on the original Blueterm too.


** Typo bug **: Outgoing End of Line -> Replace by CRLF (0x0D0A). You send CR (0D) first and LF (0A) afterwards, so you send low byte 0D first and then high byte 0A, in a result you send a word of value 0x0A0D (not 0x0D0A).

Chris Spencer

Does nothing

Leave A Comment