Download Anthem MRX Remote apk 1.0.0 free for Android smartphone

8 Aug
Anthem MRX Remote

Posted by Anthem Electronics in Entertainment | Aug. 8, 2014 | 21 Comments

Apk file size: 10.0 MB

An app that contains the remote control function of Anthem MRX 710, MRX 510, and MRX 310 audio video receivers. Similar in functionality to that of the factory remote control, the MRX app functions through the local network which allows operation of the remote control from a different room. Commands relating to one another are grouped on separate pages. To change page, swipe the screen sideways.


Important notes:

1. Software v1.2.1 or later must be installed in the MRX receiver.

2. Ethernet connection to the rear panel of the MRX receiver is required, and the control device must be on the same local network.

3. The first time that the app is used, the MRX must be powered on beforehand so the app can apply necessary settings.

4. The app can control one MRX per network.

5. MRX can be controlled by one device at a time – if two or more are running the app at the same time, MRX responds to the one with the more recent connection.

6. This app is not recommended if a custom IP or RS-232 control system is or will be controlling the MRX - it is normally best to use one type of network control to prevent conflicts.

Anthem Electronics part of our Entertainment and have average installs from 1000 to 5000. Last Update Aug. 8, 2014. Google play rating is 77.7358. Current verison is 1.0.0. Actual size 10.0 MB.

Download anthem-mrx-remote.apk 10.0 MB

21 Comments

Gary Warren

Works great With this app I can do anything that I can do with the standard remote. It works very well too. Make sure you enable the IP access in the setup menu of the receiver with your standard remote prior to trying to use this app.

Chris Brook

Works perfectly for me on latest MRX310 firmware. I've been waiting for this and I must say my expectations have been met.

Rod Miller

Works well Works pretty well. Still have some issues with turning the unit ON.

Tim Smith

Works better then the remote. Especially when adjusting balance and levels.

Fabian Komduur

Works flawlessly. But the interface could be improved much.

Al Cp

dont support MRX 300/500/700 Support only 310/510/710

Javier Girado

Doesn't work with mrx 520 It was able to connect with the receiver 1 Out of 10 and then the MRX just hung (I had to unplug and plug it again). Same results with the ipad/iOS.

Ray Beck

I'd like for this to work but as of yet I'm unable to get the phone to locate/connect to MRX 510. Confirmed both devices are on the same subnet/local network. Help? Contacted Anthem support and they've basically given up and claimed that the app isn't compatible with my Nexus 6 and said that the app will not be updated further.

Rod Miller

Works well Works quite nicely. It does not rotate if phone or tablet is placed in landscape position.

Tatu Sahrman

Mixed feelings This app works great with my Galaxy tablet but it doesn't connect to the amp with my Oneplus 2. Hopefully this gets fixed.

Anttix Manttix

If it works, it's great. Doesn't work with my Nexus 5x on Marshmallow, but does with my old Nexus 4 on Lollipop.

Tim Smith

Works better then the remote. Especially when adjusting balance and levels. Edit...just go a Droid turbo2, unable to get phone to connect. Tried powering down receiver for 2 days, uninstall, reinstall app multiple times. Pulled out old Droid maxx, connected fine. Don't know what is going on.

Michael Lund Pedersen

Warning..!!! Can destroy your speakers... This app crashes regularly which in itself is a problem. BUT what happens if the app crashes when you are in the process of increasing the volume? Well this just happened to me - the volume on my MRX710 just continued to raise until reaching max volume. Blew the tweeter on one of my main speakers (a 11.500 USD Audiovector).

Kevin Holdner

Mine crashes when I select Mode It works on my Nexus 6P until I push the Mode selector button then it immediately crashes...

Rob Sample

Works Great I've used this app on my 510, 710, and now my 1120 and AVM 60. It has always worked great. -> Upate: I've discovered that this truly is for x10 product. Sometimes it works on my x20 gear, sometimes not. A full update is coming for x20 however, and it's just around the corner.

Chris Leikvold

Works on my MRX 520 Works perfectly on my MRX 520 with the latest firmware update. Love the perfect layout of the main page of the app with just Power, Vol +/- and Mute. That's all you really need on an amp remote 99.9% of the time. Thanks Anthem!

Kevin Holdner

Not working lately Nexus 6P & 1120... Used to work, now not at all... It says it's connected but it's not. I can't change any settings, not even the volume... Not what I'd expect from a pricey AVR.

Raoul-Sam Daruwala

Doesn't work with the 720 and my Nexus 5x. Won't connect to the receiver.

Sean Hebert

Need update Does not work correctly with MRX 720

Colin Malcolm

Great app, replaces the physical remote entirely.

John Wikan

Works Great! I had installed/ uninstalled a few times wasn't working,my Co worker said "change the cat 5 cable". That took care of the problem. Works great now.

Leave A Comment