Download Albis ULAF+ Toolbox apk free for Android smartphone

25 Jan
Albis ULAF+ Toolbox

Posted by Albis Technologies Ltd. in Tools | Jan. 25, 2012 | 0 Comments

Apk file size: 0 bytes

This application calculates the remote feeding capabilities and limitations of current and power limited feeding circuits typically used in telecom access networks. It covers topologies with multiple different cascaded loads fed over copper signal cable segments with variable length and diameter. In particular case the feeding of multiple active repeater devices on digiral subscriber lines as well as network termination units.


Input Parameters:

• Power feeding source voltage [V]
• Power feeding current limitation [mA]
• Add the number of segments [n]
• Load per segment [W]
• Segment length [m]
• Segment wire diameter [mm]

Results:

• OK: Voltage and current within the specified range
> Calculated feeding current:
in Volts and in % of the maximum current
> Far end voltage:
Voltage at the most distant load (last line segment) in Volt an in % of the RPS output voltage

• Failed:
> «Total Current Too High»
cumulative current exceeds the current limitation
> «Far End Voltage Too Low»
resulting voltage at the far end (last segment)
device is too low
> «Not Enough Power»
maximum power budget exceeded
(summation of loads and power dissipation due to cable resistance)

Albis Technologies Ltd. part of our Tools and have average installs from 100 to 500. Last Update Jan. 25, 2012. Google play rating is 60.0. Current verison is None. Actual size 0 bytes.

Download albis-ulaf-toolbox.apk 0 bytes

0 Comments

Leave A Comment